The use of Bricks or Pavers to develop a pathway or outdoor patio complements a home in a way that is unrivaled. In addition, setting up a Brick or Paver walkway does not always require a pro.
The key to installing a Brick or Paver Walkway is to very first correctly prepare the area where the bricks/pavers are to be installed. The location must be removed a minimum of a foot down, eliminating all topsoil and clay soil. In addition, string lines must be strung on each side of the walkway. The string lines indicate the ended up height of the walkway.
Once the location has been dug down, 3/4" gravel stone need to be laid in and tamped down securely. The height in between the tamped down sand and the stringline ought to equal the thickness of the brick or paver.
Now that you have a steady base, place a 1" pipe or journal board the length of the sidewalk on either side of the walkway. Then using a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will produce a level area to lay the bricks/pavers.
Now place on the level sand/stone dust strips of plastic brick borders. Install a run on more info both sides of the prepared area. These click here strips will act as your walkway border and help to maintain the stability and shape of the sidewalk.
The key to laying the bricks/pavers is to make sure that they interlock with each other. Constantly stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will again assist keep the integrity of the pathway.
Undoubtedly bricks/pavers will require to be cut or divided when building the sidewalk. To actually cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the area where you want to break the brick. If your walkway has curves you will need to buy/rent a wetsaw.
After installing the bricks, develop the outdoors edges with extra sand, and then shovel in the topsoil and pack down securely.
Spread stone dust over the new sidewalk and sweep into the cracks. This will complete the interlocking of the bricks and help to get rid of any weed development.
In addition, setting up a Brick or Paver sidewalk does not necessarily require a pro. The secret to setting up a Brick or Paver Walkway is to first effectively prepare the area where the bricks/pavers are to be set up. Now that you have a stable base, place a 1" pipeline or journal board the length of the sidewalk on either side of the walkway. These strips will act as your pathway border and assistance to keep the stability and shape of the walkway. Inevitably bricks/pavers will need to be cut or split when developing the sidewalk.